Новости & Блог

Сентябрь 15, 2026

Medical endoscope optics combine small geometry, tight packaging and demanding image requirements. Supplier qualification should therefore examine how optical, mechanical and process requirements are translated into controlled production evidence. The questions below help engineering and sourcing teams prepare a focused review. Is the Requirement Package Complete? Provide the optical prescription or performance target, drawings, material specifications, coating requirements, assembly interfaces, …

Сентябрь 15, 2026

Для литых оптических деталей, производственный инструмент является частью оптической системы. Расположение входного окна, вентиляция, охлаждение, извлечение и проектирование вставок могут влиять на следы потока, двойное лучепреломление, деформация, репликация поверхности и стабильность цикла. Эти решения должны быть рассмотрены, пока интерфейсы линзы и корпуса все еще регулируются. Connect Mold Design to the Optical Requirement The mold team needs more than a …

Сентябрь 15, 2026

A complete RFQ helps an optical supplier evaluate feasibility, tooling, inspection and cost without filling critical gaps with assumptions. It also produces quotations that are easier to compare because each supplier is working from the same requirement set. 1. Identify the Part and Program Stage State the part name, application and development stage: concept, feasibility, prototype, pilot or released production. …

Сентябрь 15, 2026

Moving an optical component from prototype to mass production requires more than increasing quantity. The team must convert design intent, trial knowledge and test results into controlled drawings, tooling, processes and inspection methods. A structured transfer reduces late changes and unclear acceptance decisions. Freeze the Controlled Requirement Set Collect the released 3D model, optical drawing, material specification, coating requirement, assembly …

Сентябрь 15, 2026

An LED collimator lens turns light from a finite source into a controlled beam. The final result depends on the LED emission pattern, source size, lens geometry, материал, surface quality and assembly position. Designing for molded production early helps avoid a lens that performs in simulation but is difficult to tool, mold or align. Use Accurate LED Source Data Start …

Сентябрь 15, 2026

Molded automotive lighting optics must connect photometric performance with material behavior, tooling, assembly and environmental validation. Early DFM reduces the risk of redesign after the optical surfaces, mounting features and lamp package have already been fixed. Define the Lighting Function and Test Conditions State whether the component forms, spreads, guides or redirects light. Provide the LED source model, wavelength or …

Сентябрь 15, 2026

Stray light is any unintended light that reaches the detector or image plane. In compact cameras, machine-vision modules and sensing systems, it can lower contrast, create flare or ghost images and hide weak features. Good control requires cooperation between optical design, mechanical design, coating and manufacturing. Identify the Stray-Light Paths Begin with the intended field of view and the strongest …

Сентябрь 15, 2026

Anti-reflection coating can improve transmission and reduce unwanted reflections, but a useful specification must reflect the plastic substrate and the real operating environment. A coating developed for glass cannot automatically be transferred to a polymer lens because temperature limits, surface chemistry, moisture behavior and mechanical stress are different. Define the Substrate First State the exact resin family and grade whenever …

Сентябрь 15, 2026

An optical lens RFQ is easier to quote and manufacture when the drawing separates performance-critical requirements from general preferences. Overly broad or unnecessarily tight tolerances can increase tooling, inspection and production cost without improving the final system. The goal is to define what the assembled optical system needs and give the supplier a clear method for verifying it. Separate Optical …

Сентябрь 15, 2026

Selecting an optical plastic is an engineering decision that affects optical performance, mechanical reliability, tooling, molding stability and total program cost. PMMA, polycarbonate (PC), cyclic olefin polymer (COP) and cyclic olefin copolymer (COC) can all be used for optical parts, but they solve different problems. This guide gives product engineers and sourcing teams a practical framework for comparing these materials …

Декабрь 23, 2016

An optical coating request should connect the required spectral performance with the actual glass component, its operating environment and the agreed inspection method. A short request such as “AR coating required” leaves important questions unanswered. Clear input at the RFQ stage helps the coating and component teams review feasibility, measurement conditions and acceptance criteria together. Define the optical requirement first …

Декабрь 23, 2016

Designing an aspheric lens for injection molding requires optical performance and manufacturing feasibility to be reviewed together. A lens prescription may define the optical surfaces, but a production-ready request also needs material, mechanical, inspection and volume information. Bringing these inputs together early helps the engineering team evaluate tooling access, molding risks and the most practical validation route. Start with the …